Every good chassis needs a good set of rails to start with. This set was made in house. |
|
'28-'31 Ford Chassis
|
|
|
||
|
|
Nobody made the 28-31 like this. Aaron fitting the center cross member. Oh, the string line is the center of the chassis. Center? Don't everybody measure from the center? And yes, the tool tray under the seat will not work with our chassis. Would you rather have the strong center section or do you want to worry about you tool tray under your seat? You will not see the coil over mounts above the rear cross member, we have designed it be part of the cross member. Go page 21 to view the finished chassis. |
We offer the 28-31 chassis with 4" or 6" frame rails. We would recommend the 6" rails on most applications. Coming soon the 35-40 Ford chassis. |
Copyright reserved by Dean Oshiro. Reproduction without written approval is a violation of Copyright Laws. April 2001
